PDA

View Full Version : Trying to wire a road devil mic to president Lincoln 2+



Erik 747
01-30-2018, 07:55 PM
Any ideas? I tried pin 1white, pin 2black, pin 3red, 4not connected, 5sheild and blue, 6not connected.
Please help
Thanks

https://uploads.tapatalk-cdn.com/20180131/70e6ae05b5a0013c486ccc94ca0f60f7.jpg

Sent from my Z981 using Tapatalk

222DBFL
01-31-2018, 02:27 PM
Try one of these https://uploads.tapatalk-cdn.com/20180131/0ff0c3d50d7cb6301ae4e874c83687c4.jpghttps://uploads.tapatalk-cdn.com/20180131/c610332e5bbfb02b59e7d95385952e3f.jpghttps://uploads.tapatalk-cdn.com/20180131/3556c7355d592441001355e490443494.jpghttps://uploads.tapatalk-cdn.com/20180131/e1f760f8f016779e041262263ffd281e.jpg

222DBFL
01-31-2018, 02:28 PM
Hope this helps

Erik 747
01-31-2018, 03:58 PM
Hope this helpsThank you for your input! I tried all configurations, and still no luck. This radio doesn't make it easy, or not possible.

Sent from my Z981 using Tapatalk

222DBFL
02-01-2018, 10:03 AM
Try this one. Different radio but pretty well the same inside and mic wise. https://uploads.tapatalk-cdn.com/20180201/e570a0abd953329f6a9a864ca99cc25f.jpg

Erik 747
02-01-2018, 11:57 PM
Well I finally got it wired correctly! Thanks to your input. I really appreciate it!!

Sent from my Z981 using Tapatalk

Erik 747
02-02-2018, 12:00 AM
Well I finally got it wired correctly! Thanks to your input. I really appreciate it!!

Sent from my Z981 using TapatalkBy chance, do you have any input on Rf interference? I'm having trouble with my base station. There's interference of 7 dbs mostly in the evenings. Other times it drops to the lowest of 3. Any thoughts?

Sent from my Z981 using Tapatalk

mjd420nova
02-06-2018, 07:48 PM
Check those coax connections.

source
10-06-2019, 01:31 PM
I had same noise problem .when did some check the cable was defective .that good start any things else do some more checks

RUG
05-04-2020, 10:17 AM
Hey all. Just wanted to say ty for posting the pin-outs for the mics. I just posted a thread about a trc 479 and wanting to change out the mic receiver plug. This might do the trick.