PDA

View Full Version : anytone at-5555n



source
10-26-2019, 10:38 PM
I have one of these radio .want to connnect a desk microphone .so i need wiring diagram to make on of the adapter to used a turner microphone .anyone can help or provide me with a link so i can make one thank.
pic- radio2382


cord i want to make#2383

222DBFL
10-27-2019, 07:54 PM
Here is a photo of a similar radio. Worlds are in French but here is the conversion for that as well. Hope this helps.
https://uploads.tapatalk-cdn.com/20191028/89cd625fe7961e03941cb835bdbf15be.png
1. Blue
2. Red
3. White
4. Black
5,6,7,8 NC
Although this is for the CRT SS7900, I am pretty sure itís the same radio as the anytone 5555n just rebranded.

source
10-27-2019, 08:12 PM
Will check out later thank much.the other side go to the four pin female that connection do you have the wiring or i just have check it and find it,

222DBFL
10-28-2019, 06:25 AM
I believe this is for a 4 pin cobra mic wiring. https://uploads.tapatalk-cdn.com/20191028/794fc00f858c2450aeb762f8094377d1.png

source
10-28-2019, 05:08 PM
I want the wiring for the female 4 pin.but if not i will figure out the wiring .i dont have the radio with me so i just want to wire it up and give it to him.

222DBFL
10-29-2019, 06:16 AM
https://uploads.tapatalk-cdn.com/20191029/d712f59af9ff6c7a402edb80da8c3be1.png