preps
Results 1 to 2 of 2

Thread: galaxy 959 squeal

  1. #1
    Join Date
    Jan 2014
    Location
    petal ms
    Posts
    99
    Thanks
    5
    Thanked 112 Times in 40 Posts
    Downloads
    2
    Uploads
    0

    galaxy 959 squeal

    Howdy folks. I just did the 10kc mod on my 959 and now have to run the mic gain halfway when the amp is on or it squeals. The switch works, center=normal, left=10k down but right should be 10k up and does nothing i.e. normal channels. Do you think I screwed up the mod, should take it out, try another switch or posibley the location of the sw? Put it above the final between final and echo knob. Maybe its causeing interference. I don't know. Any help will be appreciated. 73s
    QUACKA QUACKA FOR A MUD DUCK CHECK QUACK QUACK

  2. #2
    Join Date
    Aug 2014
    Location
    Hull, Ga
    Posts
    6
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    0
    Uploads
    0
    My first thought:
    Sounds like it could a feedback issue between the mike
    and the audio section. Why? because the mike gain setting
    affects it.

    Try and see if a change in physical position, of the relationship of the
    mike and speaker makes a difference. Mover the mike away further,
    at a different place vertically or an angle.

    If that does nothing then there are other problems.

Visitors found this page by searching for

None

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •