preps
Results 1 to 5 of 5

Thread: Ts-940

  1. #1
    Join Date
    Dec 2015
    Location
    east
    Posts
    6
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Downloads
    48
    Uploads
    8

    Ts-940

    After a power supply problem was fixed now When keyed the first 2 relays in the filter board just chatter on all bands and modes no power output on watt meter and chatter can be heard through speaker. The radio before only was doing 50 watts now nothing.

  2. The Following User Says Thank You to grnlght For This Useful Post:

    222DBFL (02-17-2017)

  3. #2
    Join Date
    Jul 2013
    Location
    Port Orange. FL
    Posts
    1,135
    Thanks
    299
    Thanked 406 Times in 269 Posts
    Downloads
    0
    Uploads
    0
    Have you tried a reset of the radio? Might help. Probably not, but worth a try at least.

  4. #3
    Join Date
    Jul 2013
    Location
    Port Orange. FL
    Posts
    1,135
    Thanks
    299
    Thanked 406 Times in 269 Posts
    Downloads
    0
    Uploads
    0
    And also make sure your PS is supplying enough voltage/amperage as well. Hope you get it resolved.

  5. #4
    Join Date
    Dec 2015
    Location
    east
    Posts
    6
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Downloads
    48
    Uploads
    8
    It is a base radio the PS is good the reset did not help I found a blown driver so it must be not enough output power to keep the relay closed

  6. The Following User Says Thank You to grnlght For This Useful Post:

    222DBFL (02-17-2017)

  7. #5
    Join Date
    Dec 2015
    Location
    east
    Posts
    6
    Thanks
    0
    Thanked 2 Times in 2 Posts
    Downloads
    48
    Uploads
    8
    New drivers same problem chatter on tx, the tx led blinks with the chatter unless you unplug pa board then chatter goes away tx led is steady when keyed. really strange issue

Visitors found this page by searching for

None

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •