preps
Page 1 of 2 12 LastLast
Results 1 to 10 of 12

Thread: Need help Selecting Rig and set up.

  1. #1
    Join Date
    Jan 2018
    Location
    Louisburg NC 27549
    Posts
    7
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    0
    Uploads
    0

    Need help Selecting Rig and set up.

    Hello,
    I used to have good working knowledge radio and antenna set up and tuning. After years away. I am ready to.purchase my first CB radio in about 20 years.
    I have a 500 mile trip coming up and really want a Radio installed before I go.
    So please, what everyone's top pic under 300 dollars, again this will be for a Ford F-250, Crew Cab, with a 8 foot bed.
    Thank you for time and input.

  2. #2
    Join Date
    Jul 2013
    Location
    Port Orange. FL
    Posts
    1,135
    Thanks
    299
    Thanked 406 Times in 269 Posts
    Downloads
    0
    Uploads
    0
    A cobra 29, or a uniden 980. Either radio will do the job. You also want a good antenna setup. Sirio makes a pretty good antenna called the performer 5000. If not that one then a 102” whip with a spring. If you only want a magnet mount antenna the sirio performer 5000 and the sirio PL145 magnet mount work rather well. If you are looking for a new radio that just works, the uniden 880 or 980 work well. They make a wireless mic that plugs into them that works quite well too.

  3. #3
    Join Date
    Jan 2018
    Location
    Louisburg NC 27549
    Posts
    7
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    0
    Uploads
    0
    Thank you so much for taking the time to help this old Vet out. Head injuries are the worst, even when they are not the worst of my injuries. Memory loss is no fun. I will follow your advise. The Cobra 29 series and the Unidan 980, seem to keep showing up as the top two. But the Antenna is so important too. Thank you again.
    Last edited by f1berman; 01-23-2018 at 04:25 PM. Reason: Bad grammar

  4. #4
    Join Date
    Jul 2013
    Location
    Port Orange. FL
    Posts
    1,135
    Thanks
    299
    Thanked 406 Times in 269 Posts
    Downloads
    0
    Uploads
    0
    No worries. Hopefully I helped a bit. If you need any further help don’t be afraid to ask. We will help as much as possible. Have a Blessed day.

  5. #5
    Join Date
    Aug 2016
    Location
    Gulf Breeze, FL
    Posts
    8
    Thanks
    2
    Thanked 2 Times in 2 Posts
    Downloads
    0
    Uploads
    0
    Hey, I have a Uniden 980 SSB as my second base station with a SS Whip 35 feet up. When DX is in I can talk where I want. No extra power needed. I agree with the previous reply about the Uniden and whip since that is what I returned to radio with about a year ago. As a Vet also, I note that for the money, you get what you pay for. Keep your head down.

  6. #6
    Join Date
    Jul 2013
    Location
    Port Orange. FL
    Posts
    1,135
    Thanks
    299
    Thanked 406 Times in 269 Posts
    Downloads
    0
    Uploads
    0
    The uniden radios are great fr the price!! Yes there are better, but you have to spend 3-4 times as much. If you are looking for better radios, look into the Kenwood TS480. They have both a 100 watt and 200 watt version of these radios and they work good on AM and rock on SSB. For a HAM radio they do okay on AM versus most radios of the same kind I have heard. SSB is another story! You can get one of these Kenwood for just about the price of some of the higher end 10 meter radios, or glorified CB radios LOL. For a stock radio the good old cobra 29, the old ones, that is and the old President and RCI radios both do well. But like I said , for the money it’s hard to beat the uniden 980 with a good mic like the 2018 extreme. Anyhow, enough babbling.
    73 and God Bless
    222 Daytona Bch., FL

  7. #7
    Join Date
    Aug 2016
    Location
    Gulf Breeze, FL
    Posts
    8
    Thanks
    2
    Thanked 2 Times in 2 Posts
    Downloads
    0
    Uploads
    0
    Hey bub: I seldom use the Uniden any more, even though I do like the radio and have always gotten good reports on it. I have a "modified" ICOM IC-718 that I use for all HF frequencies. As you said of "doing OK on AM" the 718 is good on AM but does not have the "hammer" some others do. It does its best on SSB. I am nearly finished with a home brew two element Yagi for 11 meters. Waiting for 50 ft of coax and a connector with the ground screw on it and I should be ready to go. I have dragged all the 980's stuff out there with an extension and tried the beam. So far so good. Usual locals like the sound and gave it good marks. Cant wait to hit it with the 718 in DX. Anyway, local is usually Ch 33 and DX is 38/39L. Take care and holler at me if you hear me. (402-Don)

  8. The Following User Says Thank You to Old Sailor For This Useful Post:

    222DBFL (01-24-2018)

  9. #8
    Join Date
    Jan 2018
    Location
    Louisburg NC 27549
    Posts
    7
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    0
    Uploads
    0
    Thank you.
    Last edited by f1berman; 01-25-2018 at 03:49 AM.

  10. #9
    Join Date
    Jan 2018
    Location
    Louisburg NC 27549
    Posts
    7
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    0
    Uploads
    0
    222DBFL,
    Thank you. You have my attention. I am interested in a next level radio, or radio combo, I am looking the best dependable, longest Tx Rx possible.
    Within reason. Nut this vehicle will be out in very, very real, or put back areas.
    I love to speak with you if possible

    Thanks again.

  11. #10
    Join Date
    Jan 2018
    Location
    Louisburg NC 27549
    Posts
    7
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    0
    Uploads
    0
    So my Son has schooled me a little bit on Fourms.

    So I should be asking everyone is they have thoughts about spending money above 150 to 200 dollars, for the Cobra 29 series or.the Units 980

    A couple questions can you increase your range by double, by spending 3 or 4 hundred dollars?

    And could someone please explain to me what a 10 meter radio is?

Visitors found this page by searching for

None

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •