nubbyswasteland

SHARE THIS THREAD!

Results 1 to 1 of 1
  1. #1

    Join Date
    Mar 2018
    Location
    New London N.C.
    Posts
    1
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    0
    Uploads
    0

    Denton Clipperton L on 10/11 meter

    Anyone have any input as to using a Dentron Clipperton L on 10/11 meter either with a rci2990 or a Cobra 142 gtl and an elkin 6 tube with a variable key as a driver.
    I know that I will either have to build a keying circuit for the RCI 2990 to excite the Dentron for use in the cw low power position or a simple foot switch with 1/4 RCA jack to relay on the Dentron before I key the transceiver to protect the relay in the Dentron(i.e.;relay chatter-high voltage arcing=no Bueno).
    And more than likely a matching device on input side so the RCI or Cobra 142 GTL will play nice together(no input match on Dentron-not many had one only the later built versions).
    Anyone ever used a similar setup with any advice would be greatly appreciated l
    Last edited by CCRider; 03-11-2018 at 02:20 PM. Reason: More info

Visitors found this page by searching for

None

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •