I ran into the same problem while hooking up my setup. I would have argued someone until I was blue in the face if I didn't figure it out on my own. The jumper coax was reading fine on a meter. but it was bad. I switched it out and my SWR's dropped from 2.5 to 1.3 with the amp on. and flat-lined 1.0 with it off. I've also had weird readings with coax and then ran the coax a different way and it cleared it up. So ya never know. But for sure open up those waves with a longer antenna and let that amp breath...lol
Last edited by T-I-N-Y34; 08-17-2018 at 11:10 AM.
I'm as crazy as my meds let me be...Sometimes that's a little overwhelming for people...LOL
Bookmarks