preps
Results 1 to 8 of 8

Thread: Need help with channel and 10 meter setup on connex cx 3300 hp

  1. #1
    Join Date
    Oct 2018
    Location
    Jacksonville FL
    Posts
    18
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    0
    Uploads
    0

    Need help with channel and 10 meter setup on connex cx 3300 hp

    Hi I am both a licensed Ham operator (W3FAW) and enjoy chewing the rag on 11 meters. So I kinda got this Connex as a CB rig but then discovered that it was capable of doing 10 meters also. I have scoured the internet for instructions on how to set it up for both bands but to no avail. As a matter of fact I can't even seem to get it to work on channel 19 or 23 what gives? I had my first ham license in 1956, but this thing has me stumped.

  2. #2
    Join Date
    Apr 2018
    Location
    Oklahoma
    Posts
    106
    Thanks
    0
    Thanked 21 Times in 19 Posts
    Downloads
    0
    Uploads
    0
    see if one of these mods will work on your radio. shows the early and late version also.

    http://www.cbtricks.com/radios/conne...00hp/index.htm

  3. #3
    Join Date
    Apr 2018
    Location
    Oklahoma
    Posts
    106
    Thanks
    0
    Thanked 21 Times in 19 Posts
    Downloads
    0
    Uploads
    0
    here is the galaxy 33hp radio. yours could also have this version.

    http://www.cbtricks.com/radios/galax..._freq_conv.htm

  4. #4
    Join Date
    Oct 2018
    Location
    Jacksonville FL
    Posts
    18
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    0
    Uploads
    0
    Sonoma, thanks for your help. I'm a bit confused however since I still don't have a frequency chart for my radio as it presently is and the two mods in your first post don't say what they are going to accomplish. And I guess I will have to open it up and see if any mods have been done to date.
    35 years clean and sober, by the Grace of God. (PM me if you want to know more.)

  5. #5
    Join Date
    Oct 2018
    Location
    Jacksonville FL
    Posts
    18
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    0
    Uploads
    0
    Test post by admin 1 2 3 4
    35 years clean and sober, by the Grace of God. (PM me if you want to know more.)

  6. #6
    Join Date
    Apr 2018
    Location
    Oklahoma
    Posts
    106
    Thanks
    0
    Thanked 21 Times in 19 Posts
    Downloads
    0
    Uploads
    0
    if you find the right mod it will make each band on the selector to have 40 channels each. how many bands does the radio you have show?
    forget just how many the connex has, could be 6 to 8 bands after it is opened up.

  7. #7
    Join Date
    Apr 2018
    Location
    Oklahoma
    Posts
    106
    Thanks
    0
    Thanked 21 Times in 19 Posts
    Downloads
    0
    Uploads
    0
    if you find the right mod it will make each band on the selector to have 40 channels each. how many bands does the radio you have show?
    forget just how many the connex has, could be 6 to 8 bands after it is opened up.
    if it has 6 bands as I think it does this would be the channel chart for you radio.

    http://www.cbtricks.com/radios/galax...band_chart.htm

  8. #8
    Join Date
    Apr 2018
    Location
    Oklahoma
    Posts
    106
    Thanks
    0
    Thanked 21 Times in 19 Posts
    Downloads
    0
    Uploads
    0
    the radio after the mods will only go to 28.305. will not get you into all the 10 meter channels after the mod.

Visitors found this page by searching for

http:www.cbjunkies.comthreads2097-Need-help-with-channel-and-10-meter-setup-on-connex-cx-3300-hp

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •