I sold a 980 and the guy fried it right away. He accidentally put to much power to it. It burnt up the strip-like things on the board. Is it fixable or should I give it back and tell him to trash it?
I sold a 980 and the guy fried it right away. He accidentally put to much power to it. It burnt up the strip-like things on the board. Is it fixable or should I give it back and tell him to trash it?
I'm as crazy as my meds let me be...Sometimes that's a little overwhelming for people...LOL
anything can be fixed...just depends on how much your willing to pay!
I'm as crazy as my meds let me be...Sometimes that's a little overwhelming for people...LOL
nobody is going to be able to answer a loaded question like that, without first seeing the radio and what all is fried... With all the SMT boards in these radios now days, trying to repair one that's been torched might not be feasible to fix and may have to just be replaced, which if that's the case you may as well just buy a new radio...
Without seeing whats broke, how do you expect someone to tell you if it's worth fixing or not?
First off I said what was burnt. Second I'm sure the techs that work on 980's know what I'm talking about and have seen it before. And THIRD...Three people answered my question. I got 3 quotes today. I sent photos and a video of the board and the areas that were burnt up and told them exactly what happen.. 1 was 75 plus shipping 1 was 85-95 plus shipping and the other told me I'd be better off scraping it...lol I think I'm going to just tell the guy to buy another radio.
Last edited by T-I-N-Y34; 04-12-2019 at 09:22 PM.
I'm as crazy as my meds let me be...Sometimes that's a little overwhelming for people...LOL
did the buyer connect the power wires backwards ?
https://www.walmart.com/ip/Uniden-BE...EaAl2HEALw_wcB
Sounds like some traces got fried off the board. To prevent further faults, replace the burned area with bent paper clip pieces take the place and soldered down.
What I was getting at, is there's a good possibility there's more damaged than just what you see...Yes, the traces are fried, but there's probably going to be some other parts that needs to be replace but there's no way to tell till you start tinkering with it...sounds like time to make it a door stop.
Bookmarks