preps
Page 1 of 3 123 LastLast
Results 1 to 10 of 25

Thread: Wilson 5000's

  1. #1
    Join Date
    Mar 2012
    Location
    Delaware
    Posts
    87
    Thanks
    13
    Thanked 8 Times in 7 Posts
    Downloads
    0
    Uploads
    0

    Wilson 5000's

    Has any body ever noticed how narrow banded wilson 5000 antenna's are ? It is so narrow banded that when I set the swr's to flat on the bowl, they ended up being 1.4 on channel. When I used to run the wilson 1000 I was able tune it flat from channel 1-40. Why is that, is it because the 5000 has different impedence or is it just an engineering flaw they had. I spoke to alot of guys running the 5000 and they noticed the same problem with them being narrow banded.

  2. #2
    Join Date
    Nov 2011
    Location
    in the planet
    Posts
    628
    Thanks
    185
    Thanked 206 Times in 102 Posts
    Downloads
    10
    Uploads
    0
    most of the wilson antenna's out there you have to cut off 1/4 to 1 inch off of the bottom of the whip to get a flat match on some aplications not all . for starters make sure you run the 18 feet of coax recomended. you might have to place the antenna on different areas on ya roof . not every car or truck has a great match . i never had a problem with the wilson being narrow banded , that is not true at all . i can get a 1.0 on like 60 plus channels before it starts climbing up . if anything that antenna is very broadbanded the totall opposite. make sure all ya connections are good . watch out for that crazy non conducting tape they have on now at the bottom of the magnet mounts . they need to be ripped off to get a good ground . thats the only problem i had with them .

  3. #3
    Join Date
    Dec 2011
    Location
    pa
    Posts
    30
    Thanks
    0
    Thanked 6 Times in 4 Posts
    Downloads
    0
    Uploads
    0
    when running just the radio i get a flat match across all 40 .but with the amp on i can only get about a 25 channel spead of acceptable swr .i tune for ch28 as thats where i shoot skip when i get the chance .with a 500 watt deadkey i get a 1.1-1.2 swr on that channel .
    by the time i get to ch1 i wont even use the amp down that low .its a trade off .i cant get the whole 40 spread low enough to run my 500 watt deadkey .
    by the time i get to ch1 with the amp on my swr is about a 1.7 and i wont run it like that .

    sometimes its all in the amp tuning too.

  4. #4
    Join Date
    Nov 2011
    Location
    in the planet
    Posts
    628
    Thanks
    185
    Thanked 206 Times in 102 Posts
    Downloads
    10
    Uploads
    0
    try using an 18 foot jumper from the radio to the box stay away from 9 footers . 12 is ok 18 is better . if you have a driver box before the bigger box, a 6 foot or a 9 foot jumper is fine between the boxs. sometimes these class ab-1 linears dont have the best tuning along with some of these so called class c amplifier builders now a days , lol lol lol lol

  5. #5
    Join Date
    Dec 2011
    Location
    Over here now!
    Posts
    227
    Thanks
    16
    Thanked 29 Times in 26 Posts
    Downloads
    0
    Uploads
    1
    My wilson 5k is narow banded.... HIGH VOLTAGE.. is that a mag mnt 5k? I have tuned 4 antenna's on my fag mag and only one that tunes like crap is the Wilson 5k.

  6. #6
    Join Date
    Dec 2011
    Location
    fredericksburg va
    Posts
    199
    Thanks
    7
    Thanked 40 Times in 31 Posts
    Downloads
    0
    Uploads
    0
    someone dont know
    by BOOTYMONSTER » Tue Nov 11, 2008 2:07 pm
    how about an option to delete a thread we make ?
    ill admit im at least a part time idiot . sometimes i do double post when editing a post .
    some may find this hard to believe , but ....... sometimes i even get pissed and make a post i regret later . hard to believe huh?? lol

  7. #7
    Join Date
    Dec 2011
    Location
    Over here now!
    Posts
    227
    Thanks
    16
    Thanked 29 Times in 26 Posts
    Downloads
    0
    Uploads
    1
    I dont know shit!..Thank you

  8. #8
    Join Date
    Mar 2012
    Location
    Delaware
    Posts
    87
    Thanks
    13
    Thanked 8 Times in 7 Posts
    Downloads
    0
    Uploads
    0
    mines a mag mount

  9. #9
    Join Date
    Mar 2012
    Location
    Delaware
    Posts
    87
    Thanks
    13
    Thanked 8 Times in 7 Posts
    Downloads
    0
    Uploads
    0
    where can I buy a 55 antenna

  10. #10
    Join Date
    Nov 2011
    Location
    in the planet
    Posts
    628
    Thanks
    185
    Thanked 206 Times in 102 Posts
    Downloads
    10
    Uploads
    0
    this is the first time im hearing that a wilson antenna will not tune properly. weird !!!!!

Visitors found this page by searching for

wilson 5000

wilson 5000 review

wilson 5000 cb antenna review

how to tune a wilson 5000

http:www.cbjunkies.comthreads228-Wilson-5000-s

wilson 5000 magnet mount reviews

wilson 5000 antenna reviewwilson 5000 tuningtuning a wilson 5000Wilson 5000 problemstune wilson 5000 antennawilson 5000 roof top mount schematicswilson 1000 roof mount instructionswilson 5000 tunewilson5000 tuningwilson 5000 roof mount reviewschanging coax on wilson 5000Wilson 5000 RTwilson 5000 magnet mount tuningHowtotunewilson5000antinatuning wilson 5000 antennawilson 5000 coaxhow to tune wilson 5000wilson 5000 coax problemshow to change wilson 5000 coax

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •