Mobile Beam Setup using 2 Quad mount magnets

[707 Lumpy Delaware]

Is it possible to make a director and a reflector using quad magnet mounts six feet apart with the from magnet hot and the rear magnet short grounded, so that you don't have to drill. I would like to make a mobile beam set up and wondered if anybody has ever heard if it has been done, and if it worked. Please give me some feedback.

[High Voltage Mobile NJ]

anything is possible you have to go kind of high up above the roof in order to work properly for starters . people have been doing that for many years now yes .

[707 Lumpy Delaware]

How high up ?????

[High Voltage Mobile NJ]

well for 1/4 wave lengths or lower you will be lower than 9 feet. if they are ride around antenna's the antenna height will be much lower somewhere around 6 to 7 feet because they have coils . if you put up fighting sticks they will be higher a bit because they dont have a coil . try different things and have fun . if ya roofs real long try going 9 feet apart with 2 real long antenna's past 12 feet long . and smack people with a dam 1 pill or 2 pill . lol lol lol lol

[JesseJamesDallas]

My Suburban with 55's set-up as bounce-back. (front Hot, back grounded)


My Suburban with Predator 30K coiled stick antenna's...also set as Bounce-back


spacing 84" between antenna's

[High Voltage Mobile NJ]

i love them antenna's and very nice suburban Jesse James Dallas . awsome

[ThirstyBoots440]

a buddy of mine used to run a setup like what you're talking about with the trimags for mounting. while crude, it was fairly effective.

[Mistah Gravy]

J.James,nice Burb and very nice antenna set-up.i feel the jealousy creeping slowly up my leg towards my heart1!

[coolbreeze]

you can use mag mounts.

[noisemaker]

Mag mounts will work- capacitance may be a little screwey and cause higher reactance, but still should work fine