Blue Ghost Mounts ...

[D-MAX 2112]

Im sure hes trying but he has a long way to go. He helps to a point then when it gets technical he shuts down and doesnt offer any info. If your selling something aka 4 alt plus ac bracket... 93 burban... then someone must have had do it once somewhere, right..?. So a photo must exisit somewhere or a dwg? No just a "wing it" attitude
After getting the fixes/modifycations done just to get the mount bolted to the head.. it was a spiral of Obstacles..none of which that couldnt be overcome.. but when asked he would act like its the first time he heard of the issue. Like the temp sender hitting an Alt.. no way someone else didnt run into this. He would act like it was shocking. No provision for a belt tensioner either.
Maybe im the only one in the country with 4 alt with ac bracket for a 93 burban. I dont know..
Also..The entire bracket needs an entire other bracket fab'd just to remove the huge flex in the bracket.. its very weak.
So while maybe hes trying.. if your going to use his bracket beware !.. Have a welder. plasma cutter, tubing bender, drills, die grinder. different type temp sender, bunch of 1/2 in fittings to relocate the temp sender. Wire to extend the ac harness. ditch your air cleaner - it wont fit, relocate the battery,and evap canister, be ready to remove the bracket to modify for a belt tensioner.. no provision for one so the belt "slaps" welding plasma cutting required, If you using Air cond,, the compressor electrical connector has no provision.. you need to knotch the bracket,plasma cutter required.
I could keep going but i think the point is clear

Thanks
Keith 2112

rdx horn killa!!