preps
Page 1 of 2 12 LastLast
Results 1 to 10 of 14

Thread: Direct Injecting a Galaxy or Connex type

  1. #1
    Join Date
    Mar 2013
    Location
    Lawndale NC.
    Posts
    46
    Thanks
    0
    Thanked 36 Times in 14 Posts
    Downloads
    0
    Uploads
    0

    Direct Injecting a Galaxy or Connex type

    Hey guys here is the direct injection mod for galaxy and connex type radios, such as 33,44,55,66,73,77,88,99,3300hp,genral lee and some others that use this board.
    You will need the following: 1 - cap between 3uf - 10uf no more than 10uf. 1 - 1/4 mono jack chassis mount. 1 - on/on switch. wire and soldering stuff.

    1. Drill and mount the switch and mono jack. 2. Locate and remove C191. 3. Solder + leg of cap in hole closest to middle of radio. 4. Solder A wire from - side of cap to center pin of on/on switch. 5. Solder a wire from one side of the switch to the other hole of C191. 6. Solder a wire from other side of switch to the + side of mono jack. 7. Solder - side of mono jack to board ground (you can solder to a can).

    Ok if you are using a mylar style cap it doesn't matter which side of the cap you put to the board but just make sure it goes to the hole of C191 Closest to Middle of Radio. I used a Tantalum cap which has a +/- leg. Ok you will also need away of keying radio either a foot or hand switch or even a stock mic with audio wire unhooked. but these radios a 4 pin mic plugs so they are very easy to make a foot or hand switch. If you need any help with making a foot or hand switch please ask and I will help as much as I can. I will post a new post later with all my foot and hand designs for 4 and 5 pin radios. I hope this will help someone have fun and enjoy!!!
    Last edited by scooter71nc; 03-22-2013 at 03:09 AM.

  2. The Following 10 Users Say Thank You to scooter71nc For This Useful Post:

    coolplayer_48 (01-23-2024), CrazyJ (12-27-2018), doughboy (03-04-2014), Mango080 (04-25-2021)

  3. #2
    Join Date
    Jul 2013
    Location
    Pennsylvania
    Posts
    1
    Thanks
    0
    Thanked 4 Times in 1 Post
    Downloads
    0
    Uploads
    0

    inject

    can you do this with a stonewall jackson and if so can you pleas help me im tird of spending money on things and not geting what i want to hee thank you (jake)

  4. The Following 4 Users Say Thank You to shiner773 For This Useful Post:


  5. #3
    Join Date
    Aug 2012
    Location
    Round Rock, TX
    Posts
    394
    Thanks
    94
    Thanked 196 Times in 100 Posts
    Downloads
    7
    Uploads
    0
    Thanks for the info.
    Last edited by Silverado 996; 02-02-2014 at 10:51 AM.
    Silverado 996 back in the woods and I'm gone!
    * Cobra 29LXLE *
    * Ranger 2970N2 * 5' FireStik FS-5 *
    * Uniden BearCat 12 watt spearker *


    "It is not the strongest of the species that survives, nor the most intelligent, it is the one most adaptable to change, that survives"

    - Charles Darwin

  6. The Following 4 Users Say Thank You to Silverado 996 For This Useful Post:


  7. #4
    Join Date
    Jan 2014
    Location
    petal ms
    Posts
    99
    Thanks
    5
    Thanked 112 Times in 40 Posts
    Downloads
    2
    Uploads
    0
    Not to sound stupid but is direct inject what you are doing when you use a mixer and studio mic? And will this work on a pc66xl and a galaxy959 also?

  8. The Following 4 Users Say Thank You to halfwatt959 For This Useful Post:


  9. #5
    Join Date
    Aug 2012
    Location
    Round Rock, TX
    Posts
    394
    Thanks
    94
    Thanked 196 Times in 100 Posts
    Downloads
    7
    Uploads
    0
    Quote Originally Posted by halfwatt959 View Post
    Not to sound stupid but is direct inject what you are doing when you use a mixer and studio mic? And will this work on a pc66xl and a galaxy959 also?
    Look up direct injected galaxy 959 on YouTube. There a few cats on there laying it down.
    Silverado 996 back in the woods and I'm gone!
    * Cobra 29LXLE *
    * Ranger 2970N2 * 5' FireStik FS-5 *
    * Uniden BearCat 12 watt spearker *


    "It is not the strongest of the species that survives, nor the most intelligent, it is the one most adaptable to change, that survives"

    - Charles Darwin

  10. #6
    Join Date
    Aug 2012
    Location
    Arizona
    Posts
    11
    Thanks
    8
    Thanked 2 Times in 2 Posts
    Downloads
    0
    Uploads
    0
    Direct Inject is when you connect your audio gear output to the internal modulator of your radio,bypassing the internal microphone pre-amplifier and limiter

    People think that a mixer is needed to run audio gear but the reason that a mixer is used is because of the audio pre-amplifier built-in

    You can use a: microphone + pre-amplifier (solid state or tube) + equalizer + compressor/limiter connected to the microphone input of your radio or straight to the internal modulator

    When using the mic/input the internal radio microphone pre-amplifier needs to be modified to pass more audio bandwidth

    Hope this helps

  11. #7
    Join Date
    Aug 2015
    Location
    Pennsylvania
    Posts
    10
    Thanks
    5
    Thanked 0 Times in 0 Posts
    Downloads
    2
    Uploads
    0
    I wonder how this would work on my HR2600. Anybody try it?

  12. #8
    Join Date
    Jan 2016
    Location
    Michigan
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    1
    Uploads
    0
    Whats the differences in the type of cap, and the values used for this mod? I just used a 10uf electrolytic.

  13. #9
    Join Date
    Jan 2016
    Location
    Michigan
    Posts
    2
    Thanks
    0
    Thanked 0 Times in 0 Posts
    Downloads
    1
    Uploads
    0
    I'm also curious how this would work with this mod below, or am i bypassing it by direct-injecting? Goldfinger's HiFi mod for ept3600 series board

    Receive:

    C36: Change to a 2.2uF, 50 Volt (or better) mylar/polyester film
    C38: Remove for more highs
    C39. C154, C155: change to 2.2uF 50 volt (or better) Non-polarized electrolytic or mylar/polyester film
    C157: Change to a 2.2uF, 16 Volt (or better) tantalum (observe polarity)

    Transmit:

    C129: Change to a 10uF, 16 Volt (or better) tantalum (observe polarity)
    C187, C191: Change to 2.2uF, 50 volt (or better) mylar/polyester film

  14. #10
    Join Date
    Jan 2017
    Location
    virginia
    Posts
    11
    Thanks
    4
    Thanked 0 Times in 0 Posts
    Downloads
    5
    Uploads
    0
    radio's using EPT069611A board ( 2547, 939, 949, 959,) process same as above except location is c235. If using polarity type capacitor neg. lead goes to switch, positive lead goes to vacated hole at c235 closest to middle of board ( component side up )Name:  20170116_103253.jpg
Views: 158
Size:  2.28 MBName:  20170116_103337.jpg
Views: 163
Size:  3.32 MBName:  20170116_103536.jpg
Views: 160
Size:  3.05 MBName:  20170116_112158.jpg
Views: 161
Size:  1.80 MB

Visitors found this page by searching for

cb radio direct injection

direct injecting a galaxy 2517

direct inject galaxy radio

instructions to direct inject a Connex Saturn Cx-33 ssb

how to direct inject a cobra 2000 or cobra 148

goldfinger hi fi mods

Connex Saturn CX-33ssb direct injection

how to direct inject a galaxy dx 98VHP RADIO

connex cx-33 ssb mods

hifi cb mod

http:www.cbjunkies.comthreads855-Direct-Injecting-a-Galaxy-or-Connex-type

cb direct inject audio

connex dx 44 mods

connex 44 dx modulation adjustment

ept360014b mods

http:mail.nubbyswasteland.comthreads855-Direct-Injecting-a-Galaxy-or-Connex-type

direct injecting galaxy

direct injected galaxy dx2517

direct injecting a galaxy radio

direct inject galaxy

direct injecting my galaxy swr is rising

direct inject audio cb radio

how to direct inject a galaxy 959

direct inject cb radio for sale

galaxy 959 direct inject spot

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •