A normal size aftermarket car stereo is refered to as being a single DIN size. DIN is a standard measurement for all aftermarket head units. It's the German abbv. for Deutsche Industrie Norm.. It measures 2 1/8" tall and 7 1/8" wide, the depth varies. Other common sizes are "din in an half"( 3 3/16)" and "double din"(4 1/4") the only thing that changes is the height, the width is still 7 1/8".

If the console you're putting in your Wrangler came with a slot already made into it for a stereo I would bet its a single DIN size. A cb radio like my Cobra 29 LX measures 7.25" W x 9.25" D x 2.25" H, so you would have to trim the stereo slot in the console to fit a cb radio like thus. You said you're going to be installing a Cobra 25 WXNWST, now that's a different story. A Cobra 25 WXNWST measures 6.38"W by 2.2"H by 8.62"D so if you're wanting to install this in a single DIN stereo slot then you'll have to use your imagination & fabricate a trim piece to go around the DIN slot & the inner slot of the trim plate be the size of the Cobra 25. Shouldn't be too hard. I would start by getting a "cage" that goes on car stereo & cut & fabricate it to fix around the Cobra 25 radio & secure to to the Cobra 25 radio using the screws that hold the top & bottom covers on the radio & maybe a washer to keep the screws to being pulled straight thru holes on the cage.

Sorry for the length of the post guys. I just wanted to go into good detail about my info & idea for fitment. Good luck man, Beavis417
Sent From My Davemade™ Android Phone