![$vbphrase[Ran with vbulletin]](images/RedMetal/misc/blank.png)
My friend put an old cobra 19 dx iv cab in his pickup truck. It doesn't perform well so I was wondering what's a good way to wake it up. Any ideas?
cobra 19 help
My friend put an old cobra 19 dx iv cab in his pickup truck. It doesn't perform well so I was wondering what's a good way to wake it up. Any ideas?
I ment cb not cab sorry guys
Its only gonna perform as good as the antenna attached to it. Get a good antenna and set the swr properly. Open up the radio and turn the modulation pot up to max then back it off a tad and turn the modulation up.
Post Dispatched Via Rabbit Vibrator.
Not allot you can do with a Cobra 19...Except up-grade to a 29!
Or run an amp off it
Post Dispatched Via Rabbit Vibrator.
I've never messed with the inside of a cb. Can you find a pic somewhere and edit something into the pic to point out the mod pot?
Check on CB Tricks.comOriginally Posted by the caveman
Locate VR2 pot and turn to substantially increase both modulation and TX
power swing.
19dx_iii_parts_layout.pdf
VR2 is located in the upper left portion of the board layout...There are other things you can do but I wouldn't with the Cobra 19 DX...Only other thing I would do is get a good power Mic, adjust VR2 3/4 open and get a good wilson antenna.
de 747 and I'm clear...
"He who controls the electromagnetic spectrum controls the world..."
Posting Permissions
Reply With Quote
Bookmarks