Any ideas? I tried pin 1white, pin 2black, pin 3red, 4not connected, 5sheild and blue, 6not connected.
Please help
Thanks
Sent from my Z981 using Tapatalk
Any ideas? I tried pin 1white, pin 2black, pin 3red, 4not connected, 5sheild and blue, 6not connected.
Please help
Thanks
Sent from my Z981 using Tapatalk
Try one of these
Hope this helps
Try this one. Different radio but pretty well the same inside and mic wise.
Well I finally got it wired correctly! Thanks to your input. I really appreciate it!!
Sent from my Z981 using Tapatalk
222DBFL (02-02-2018)
Check those coax connections.
I had same noise problem .when did some check the cable was defective .that good start any things else do some more checks
telecommunication consultant
Hey all. Just wanted to say ty for posting the pin-outs for the mics. I just posted a thread about a trc 479 and wanting to change out the mic receiver plug. This might do the trick.
Bookmarks