Check the Imax installation instructions on the rings being adjusted up or down. you should get flat swr on a barefoot 959 with Imax. Also make sure coax is connected right and no bad pl-259's. Because if you run power it will go up slightly and don't want to exceed 2.0:1 with power. Really anything under 2.0:1 is good, but barefoot should close to flat once those rings on Imax are right. i usually go to channel 20 first to get flat then go to 1 and 40. I'll check if the manual is online and post if is. Good Luck
RCI-2950DX, 1978 Cobra 148 GTL Taiwan, SHURE526T MIC, Tug-8 With Astatic 10 DA Head, Astatic 575M6, ASTRON 70/20 AMP POWER SUPPLIES, IMAX 2000 W GROUND PLANE KIT. TIMES MICROWAVE LMR-400 COAX, RF CHOKES. DIAMOND SWR/POWER INLINE METER. 250 of Sea Level Under Me. Recent World Radio Member.
Bookmarks