preps
Results 1 to 8 of 8

Thread: cobra 19 help

  1. #1
    Join Date
    Mar 2013
    Location
    Southern Indiana
    Posts
    517
    Thanks
    193
    Thanked 247 Times in 83 Posts
    Downloads
    0
    Uploads
    0

    Question cobra 19 help

    My friend put an old cobra 19 dx iv cab in his pickup truck. It doesn't perform well so I was wondering what's a good way to wake it up. Any ideas?

  2. #2
    Join Date
    Mar 2013
    Location
    Southern Indiana
    Posts
    517
    Thanks
    193
    Thanked 247 Times in 83 Posts
    Downloads
    0
    Uploads
    0
    I ment cb not cab sorry guys

  3. #3
    Join Date
    Mar 2013
    Location
    Morris Plains
    Posts
    71
    Thanks
    1
    Thanked 11 Times in 11 Posts
    Downloads
    0
    Uploads
    0
    Its only gonna perform as good as the antenna attached to it. Get a good antenna and set the swr properly. Open up the radio and turn the modulation pot up to max then back it off a tad and turn the modulation up.

    Post Dispatched Via Rabbit Vibrator.

  4. #4
    Join Date
    Jan 2012
    Location
    Republic of Texas
    Posts
    865
    Thanks
    127
    Thanked 536 Times in 341 Posts
    Downloads
    0
    Uploads
    0
    Not allot you can do with a Cobra 19...Except up-grade to a 29!


  5. #5
    Join Date
    Mar 2013
    Location
    Morris Plains
    Posts
    71
    Thanks
    1
    Thanked 11 Times in 11 Posts
    Downloads
    0
    Uploads
    0
    Or run an amp off it
    Post Dispatched Via Rabbit Vibrator.

  6. #6
    Join Date
    Mar 2013
    Location
    Southern Indiana
    Posts
    517
    Thanks
    193
    Thanked 247 Times in 83 Posts
    Downloads
    0
    Uploads
    0
    I've never messed with the inside of a cb. Can you find a pic somewhere and edit something into the pic to point out the mod pot?

  7. #7
    Join Date
    Jan 2012
    Location
    Republic of Texas
    Posts
    865
    Thanks
    127
    Thanked 536 Times in 341 Posts
    Downloads
    0
    Uploads
    0
    Quote Originally Posted by the caveman View Post
    I've never messed with the inside of a cb. Can you find a pic somewhere and edit something into the pic to point out the mod pot?
    Check on CB Tricks.com


  8. #8
    Join Date
    May 2013
    Location
    Georgia
    Posts
    53
    Thanks
    5
    Thanked 26 Times in 17 Posts
    Downloads
    0
    Uploads
    0
    Locate VR2 pot and turn to substantially increase both modulation and TX
    power swing.

    19dx_iii_parts_layout.pdf

    VR2 is located in the upper left portion of the board layout...There are other things you can do but I wouldn't with the Cobra 19 DX...Only other thing I would do is get a good power Mic, adjust VR2 3/4 open and get a good wilson antenna.
    de 747 and I'm clear...

    "He who controls the electromagnetic spectrum controls the world..."

Visitors found this page by searching for

None

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •