Here is a Ranger SRA-198 Noise Cancelling microphone purchased from Redman CB Stop in New Jersey. Tom at this time normally does not have this microphone on the web site but if you e-mail him he can get you one at a decent price. These microphones come with Ranger radios. Used this microphone on a custom Galaxy DX 959HP-2290 CB Radio. Felt the microphone had a good feel and ergonomic to hold. Very smooth key up and exterior PTT button comfortable. It has a solid plastic body, thicker than most. Hang up button very solid. Inside the back covers is attached a weighted plate. The microphone cord very flexible with good strain relief on both ends. The coil windings on the microphone cord slightly larger than most. Inspecting the inside revealed a solid well build unit. First generation of the SRA-198 did not have a resistor and capacitor. After complaints the Ranger techs recommended a 4.7K resistor and 0.022uF capacitor! This is consider the generation II, SRA-198. The internal PTT is very simple, short travel and direct straight motion to the external PTT. When keying up and handling the microphone with on air tests it is extremely quiet. I feel this is one of your better built microphones that will last a long time! Radios that have been tuned up will sound cleaner with no background noise. May not be a good fit for stock radios. Modulation will be too low since that is the nature of stock rigs. I am saving this one for my custom Cobra 29 LTD Army Strong Edition. This microphone reminds me of a military style. I ran a gate and it will be up on the board tomorrow, Bulldog.

More pictures on my Photobucket album - http://s196.photobucket.com/user/Ame...g%20Microphone

Ranger USA - http://www.rangerusa.com/accessories.html

Review on CB Radio Magazine (Generation 1) - http://www.cbradiomagazine.com/Micro...20SRA-198.html