Cobra 29 variable power mod problem.

[sonoma]

Tiny, on the kits he is selling does he have you hooking up in the same locations as the info I sent you. should hook up in 4 locations for stability of the variable. I know one kit a couple years ago had you hooking up on the jumper just ahead of jp36 on a cobra and putting a ground on one leg of the audio limiting trans to kill the limiter. his only had 2 hookup locations also. just curious as he did not show in his video where it was hooked to.

[T-I-N-Y34]

Tiny, on the kits he is selling does he have you hooking up in the same locations as the info I sent you. should hook up in 4 locations for stability of the variable. I know one kit a couple years ago had you hooking up on the jumper just ahead of jp36 on a cobra and putting a ground on one leg of the audio limiting trans to kill the limiter. his only had 2 hookup locations also. just curious as he did not show in his video where it was hooked to.

These are the instructions he sends. From what I see it's a solid install. but you may see something I don't. The only difference in this picture and my radio is And the slug is gone due to the 520 mod, and I've done the 4700uF power input mod to mine. The cap on the back of the plug. But that shouldn't have anything to do with it. Seeing it's only the ground side not the positive side as well.