preps
Results 1 to 10 of 11

Thread: New 40’ steel push-up mast

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. #10
    Join Date
    Feb 2014
    Location
    West coast
    Posts
    177
    Thanks
    0
    Thanked 114 Times in 71 Posts
    Downloads
    0
    Uploads
    0
    The guy wires don't need to be non-metal. Using the ceramic eggs it can be cut and tuned to enhance a high takeoff angle for skip. Placing guys between ground radials can create what the transmitted signal sees as a ground element. They can also be used to capture an offending harmonic but it must be provided a path to ground. There can also be differences between the ground potential between a ground at the antenna base and a ground at the station. Don't rely on outlets, water pipes or lines from other services, establish your own ground system and don't mix them. And as with any outside antenna, lightning protection is essential.

  2. The Following User Says Thank You to mjd420nova For This Useful Post:

    Fistfulladirt (01-21-2023)

Visitors found this page by searching for

None

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •